IBC ToteTexas

Reuse ledger, year to date: 41,200 totes diverted from Texas landfills this year. 2,060k lb of HDPE kept in service. 1,772k lb of steel cage recovered. 3,140 tons of CO₂e avoided. 92% of our wash water recycled on site. 68 Texas counties served from one Austin yard. Full methodology at /sustainability/reuse-ledger.

Deep catalog · not in the main menu

Every thread,
adapter and valve
we stock.

This page exists because ordering the wrong adapter is the most common and most annoying mistake in the tote business. Read the thread section, then order once.

Close-up of a single 275 gallon IBC tote showing its capacity label, UN placard and blue ball valve

The short answer

Almost every composite IBC in Texas discharges through an S60x6 60 mm coarse buttress thread. From there, one adapter takes you to 2 inch NPT, camlock or garden hose. Choose a ball valve for thin product and a full-port butterfly valve for anything viscous.

Order fittings

List thread sizes and quantities in the Message field. Photos help if you're unsure what you have.

We reply here, so it has to be an inbox you actually read.

US or Canadian number, 10 digits. We format it as you type.

Two-letter code or full name — checked against your postal code.

5-digit US ZIP, or a Canadian postal code like K1A 0B1.

Plain text only. Links can't be submitted through this form.

No phone number required from us — we work by email and we answer fast. Fields marked * are required.

From the yard

Wide view of a warehouse hall filled with reconditioned IBC totes on polished concrete
Covered inventory. What you see on the rack is what goes on your truck.
Rows of used 275 gallon composite IBC totes stacked two high in an outdoor yard under a blue sky
Graded stock on the outdoor rows, stacked two high and waiting on a grade tag.

Reference

Thread and fitting standards

Standards you will meet on a composite IBC
FittingThreadWhere usedWhat to know
S60x6 buttress60 mm coarse buttressMost common outlet thread on European-built composite IBCsThe default outlet on Schütz, Mauser and Werit tanks. Adapts to 2" NPT, camlock or garden hose with a single moulded adapter.
2" NPT2 inch national pipe taperNorth American plumbing standardWhat most US buyers actually want on the outlet. Tape the threads; NPT seals on the taper, not a gasket.
2" camlock (Type A/B/C/E/F)Cam-and-groove quick connectTransfer and pump connectionsFastest way to connect and disconnect a hose. Type C female coupler on the hose, Type F male adapter on the tote is the usual pairing.
3/4" garden hose (GHT)Garden hose threadIrrigation, ranch water, rain captureAdapts straight off S60x6. Restricts flow considerably — fine for drip, poor for filling a sprayer.
6" screw lid6 inch coarse, vented or solidStandard fill opening on most 275 and 330 gallon totesVented lids prevent vacuum collapse when drawing down fast. Solid lids seal for transport. Know which one you have.
9" screw lid9 inch coarseLarger fill opening, viscous product and cleaning accessCommon on food-grade and high-viscosity units. Easier to clean through, harder to seal.
2" ball valveS60x6 inlet, 2" NPT or camlock outletStandard discharge valveQuarter-turn, positive shutoff, cheap to replace. Not ideal for very viscous product — the port is reduced.
2" butterfly valveS60x6 inlet, full portViscous product dischargeFull-port design so syrup, oil and concentrate actually flow. The upgrade worth paying for on food-grade totes.

Valves

Choosing a discharge valve

Two decisions: port geometry and seal compound. Both are cheap to get right and expensive to get wrong.

Discharge valve comparison
ValvePortFlowBest forAvoid for
2" ball valveReduced (≈ 1.5 in effective)Good on water and thin chemistryWater, fertilizer, hypochlorite, glycol, general industrialSyrup, oil, concentrate, slurry
2" full-port butterflyFull 2 inRoughly double a ball valve on viscous productSyrup, molasses, edible oil, polymer, anything thickNothing, really — it just costs more
3" butterfly (large outlet)Full 3 inFastest availableHigh-viscosity food product, rapid batch dischargeTotes without a 3 in outlet flange
Camlock-outlet valveReduced or fullDepends on bodyFrequent hose connect and disconnectStatic storage — you're paying for convenience you won't use

Lids and caps

Vented, solid, and the difference that ruins bottles

6 inch vented lid

The default for anything you draw down under pump. The vent lets air in as liquid leaves, which is the only thing standing between you and a collapsed bottle.

6 inch solid lid

Sealed for transport and for product you want to keep isolated from air. Fine for gravity draw. Dangerous under pump unless you open it first.

9 inch lid

Larger opening for viscous product and for getting a cleaning head inside. Common on food-grade units, slightly harder to seal reliably.

Replacing a valve without making a mess

Empty the tote completely and rinse it. Support the outlet — the flange is moulded into the bottle and levering against it cracks HDPE. Unscrew the valve body from the outlet flange, remove the old gasket entirely, seat a new gasket, and hand-tighten the replacement before snugging with a strap wrench. No pipe wrenches, no cheater bars.

Then leak-test with water before you put product in it. Ten minutes of water on the floor beats 275 gallons of something else.

Tape, dope and when to use them

NPT threads seal on the taper and want PTFE tape or a compatible thread sealant. S60x6 buttress threads seal on the gasket, not the thread — adding tape there does nothing useful and can hold the gasket off its seat. Learn the difference once and you will never chase a mystery drip again.

Spares worth keeping

One spare valve, two spare gaskets and one adapter per fleet of ten totes. Gaskets are the consumable; valves fail rarely but always at an inconvenient time. If you are running a managed fleet, we hold spares against your account so a failure is a same-day fix.

Questions people actually ask

+How do I identify my outlet thread?
Measure the outside diameter of the male thread on the tote. Roughly 60 mm (2.36 in) with a coarse, asymmetric sawtooth profile is S60x6. A 2-inch NPT male measures about 60 mm too but has a tapered, symmetrical V-profile and only about 11 threads per inch. If in doubt, photograph it side-on and send it with your enquiry.
+Why won't my NPT fitting screw into the tote?
Because S60x6 is a buttress thread, not a pipe thread. They are close enough in diameter to start and completely incompatible in profile. Forcing one destroys both. Use an S60x6 to NPT adapter.
+Which camlock type do I need?
The common pairing is a Type F male adapter on the tote side and a Type C female coupler on the hose. Type A and B are the reverse arrangement, and Type E is a male adapter with a hose shank. Buy the pair together and you cannot get it wrong.
+Do valves come with the tote?
Yes — every tote we sell ships with a working discharge valve and a lid. These parts are for replacements, upgrades and spares.

Related

Next

Quick reference

Numbers worth having open in another tab

The figures that come up in almost every conversation, whichever page you arrived on.

275 gallon · 1040 L

48×40×46

Tare
130 lb
Gross, water
2,425 lb
Stack full
2 high
Stock
Always in stock

330 gallon · 1250 L

48×40×53

Tare
160 lb
Gross, water
2,915 lb
Stack full
2 high
Stock
Always in stock

264 gallon · 1000 L

48×40×46

Tare
125 lb
Gross, water
2,325 lb
Stack full
2 high
Stock
Usually in stock

350 gallon · 1325 L

48×40×56

Tare
175 lb
Gross, water
3,095 lb
Stack full
2 high
Stock
Order in

Outlet thread

S60x6 — 60 mm coarse buttress. Not 2" NPT.

Grades published

N, R, F, A, B, C, X — applied at the wash bay.

Wash standards

W1 rinse through W4 caustic CIP at 160°F.

UN retest

Leakproofness 2.5 yrs, requalification 5 yrs.

From the yard notes

Longer reading on this

32 articles written by the people who wash, grade, weld and dispatch. No marketing copy in any of them.

All 32 articles

On the yard this week

Close-up of a single 275 gallon IBC tote showing its capacity label, UN placard and blue ball valve
A 275 with the plate, the capacity label and a standard 2-inch ball valve.
Rows of used 275 gallon composite IBC totes stacked two high in an outdoor yard under a blue sky
Graded stock on the outdoor rows, stacked two high and waiting on a grade tag.

More answers

While you're here

Pulled from the full FAQ, which runs to forty-plus answers across buying, grades, food safety, sizes, selling, compliance, delivery and care.

Read the full FAQ

Where we are
3505 Montopolis Dr, Austin, TX 78744
Yard hours
Mon–Thu 7:30a–5p · Fri 7:30a–4p · Sat 8a–12p · Sun closed (Central Time)
Coverage
68 Texas counties on scheduled routes, from one Austin yard.

+How fast can I get totes?
Austin metro is usually next business day. Most of Central and South Texas is inside 48 hours. Longer hauls ride consolidated routes — San Antonio twice weekly, Houston and DFW weekly, the Permian monthly.
+Cash or credit?
Either. Credit against future purchases is typically worth more per unit, which suits operations that buy and return continuously.
+Is a 275 gallon tote the same as 1,000 litres?
No. 1,000 litres is 264 US gallons. Many sellers round it up to 275; we list both figures because eleven gallons matters if you batch to a recipe.
+Are your totes NSF certified?
The resin in new and rebottled bottles meets FDA 21 CFR 177.1520. Container-level NSF/ANSI 61 certification is a manufacturer programme that does not carry over to reconditioned units. If your specification cites it, you need new containers and we'll tell you so.
+Are stained totes a problem?
Cosmetically yes, functionally usually not. Staining is a strong signal about prior contents, which is why stained units drop a grade, but a stained bottle holds liquid exactly as well as a clear one. It does make the level strip harder to read.

Photograph the outlet and send it.

Thirty seconds with a phone saves a week of shipping the wrong adapter back and forth. Attach the detail in the Message field and we'll identify it.

Get a quoteBack to accessories